| SKU | dR [mm] | d [mm] | D ~ ungespannt [mm] | D gespannt [mm] | a ungespannt [mm] | emax [mm] | |
|---|---|---|---|---|---|---|---|
| 1200 | 1,5 – 1,8 | 0.5 | 6.0 | 6,1 – 6,7 | 1.4 - 0.4 | 0.3 | Details |
| 1201 | 1,9 – 2,2 | 0.6 | 6.8 | 6,9 – 7,5 | 1.7 - 0.4 | 0.3 | Details |
| 1202 | 2,3 – 2,6 | 0.8 | 7.8 | 7,9 – 8,5 | 2.0 - 0.4 | 0.3 | Details |
| 1203 | 2,7 – 3,3 | 0.9 | 9.2 | 10,3 – 10,9 | 2.5 - 0.4 | 0.5 | Details |
| 1204 | 3,4 – 4,2 | 1 | 11.0 | 12,0 – 12,8 | 3.1 - 0.4 | 0.5 | Details |
| 1205 | 4,3 – 5,3 | 1.1 | 13.0 | 13,8 – 14,8 | 4,0 – 0,4 | 0.5 | Details |
| 1206 | 5,4 – 6,4 | 1.2 | 15.0 | 16,7 – 17,7 | 5,1 – 0,6 | 1.0 | Details |
| 1207 | 6,5 – 7,5 | 1.3 | 17.0 | 18,5 – 19,5 | 6,2 – 0,6 | 1.0 | Details |
| 1208 | 7,6 – 8,8 | 1.4 | 20.0 | 21,0 – 22,2 | 7,3 – 0,6 | 1.0 | Details |
| 1209 | 8,9 – 10,1 | 1.5 | 23.0 | 23,6 – 24,8 | 8,6 – 0,6 | 1.0 | Details |
| 1210 | 10,2 – 11,4 | 1.8 | 26.0 | 26,3 – 27,5 | 9,9 – 0,8 | 1.5 | Details |
| 1211 | 11,5 – 12,7 | 2 | 29.0 | 29,8 – 31,0 | 11,2 – 0,8 | 1.5 | Details |
| 1212 | 12,8 – 14,0 | 2.2 | 32.0 | 32,4 – 33,6 | 12,4 – 0,8 | 1.5 | Details |
| 1213 | 14,1 – 15,5 | 2.5 | 36.0 | 36,4 – 37,8 | 13,7 – 0,8 | 1.5 | Details |
| 1214 | 15,6 – 17,3 | 2.5 | 40.0 | 40,4 – 42,1 | 15,2 – 0,8 | 1.5 | Details |
Circlip
The BAUMANN Circlip, produced by Federnfabrik Schmid, is a proven safety component for shafts and axles. It may be used instead of grub screws, pins, locating rings retaining washers or other circlips.
Advantages: The radial mounting of BAUMANN Circlips does not require any special tools. The same Circlip may be used within a defined shaft diameter range. These components are made of spring steel wire, quenched and tempered. Additional anti-corrosive treatments are possible.
d = wire diameter
D = diameter
a = a untensioned [mm]
emax = offset
dR = groove diameter
dW = shaft diameter